Walter 15R456 4.5" x 7/8" 60 Grit Enduro-Flex Flap Disc
The ENDURO-FLEX one-step finishing discs not only meet but surpass the challenges that the metal fabricating industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the ENDURO-FLEX finishing disc will stay sharper for a longer period of time while removing more material faster.
In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the ENDURO-FLEX disc can be restored to like-new performance by reducing the diameter of the ECO-TRIM backing.
- Arbor: 7/8"
- Grit: 60
- Max RPM: 13,300
- One step finishing solution to reduce cost
- Quiet, vibration-free grinding
- Raised hub fits all standard grinder back flanges
- With integral thread 5/8"-11"
- ECO-TRIM backing for increased life and flexibility
- Safe and easy to trim
- Always use a back flange
- Backing can be trimmed for working in corners
Materials
- Steel
- Stainless steel
Applications
- Grinding and finishing welds
- Surface finishing
| PRODUCT NUMBER | DIAMETER | ARBOR | GRIT |
| 4.5" | 7/8" | 40 | |
| 4.5" | 7/8" | 60 | |
| 4.5" | 7/8" | 80 | |
| 4.5" | 7/8" | 120 | |
| 5" | 7/8" | 40 | |
| 5" | 7/8" | 60 | |
| 5" | 7/8" | 80 | |
| 5" | 7/8" | 120 | |
| 6" | 7/8" | 40 | |
| 6" | 7/8" | 60 | |
| 6" | 7/8" | 80 | |
| 6" | 7/8" | 120 | |
| 7" | 7/8" | 40 | |
| 7" | 7/8" | 60 | |
| 7" | 7/8" | 80 | |
| 7" | 7/8" | 120 |
Environmentally-Friendly
- REDUCED WASTE: ECOTRIM allows trimming the backing pad up to 3 times to expose unused material and extend the life of the product.
- LESS PLASTIC: 35% of the weight of the ECOTRIM is natural fibers to reduce overall quantity of synthetic components required to produce backing pads
- LESS ENERGY CONSUMPTION: The cold cured glue used in conjunction with the ECOTRIM doesn’t require an additional oven curing step and reduces overall energy consumption during the manufacturing process of the discs
